Learn how to create a grass-textured creeper from Minecraft

At this time, we’ll be tapping into some Minecraft inspiration and making a photo-realistic creeper! This Photoshop impact is simpler than it seems to be, and it makes use of easy portray strategies to show default shapes into 3D. You may even be studying how you can use textures in Photoshop.

What you may study on this Photoshop tutorial

• Learn how to make textures in Photoshop
• Learn how to make a Minecraft grass texture creeper 
• Learn how to use Mix If in Photoshop 
• Learn how to paint lighting in Photoshop 

What you may want

1. Learn how to create the bottom of the creeper 

Step 1

Create the face and the physique of your creeper utilizing the Rectangle Device. The colours do not matter at this stage. 

Step 2

Conceal the attention and mouth shapes.

Give the top and physique shapes slight curves utilizing the Warp Mode within the Remodel Device. This may make the creeper look extra natural. 

Step 3

Flip the attention and mouth shapes again on. Maintain Management/Command and click on every of the shapes. This may create a variety across the shapes. 

Conceal the shapes once more, and add a Layer Masks to the top form. The masks will take the form of the choice. 

Step 4

Use the Rectangle Device to create a easy 3D floor impact within the mouth. The colour would not matter, nevertheless it helps to make both a lighter/darker model of the face form. 

Step 5

Use the Rectangle Device to create a darkish inexperienced #040600 form behind the face. Title the form “Interior Face.”

Step 6 

Add a Bevel & Emboss layer impact to the top form. 

2. Learn how to add textures in Photoshop 

Step 1

Subsequent, we’ll apply Minecraft grass textures to our creeper. Obtain a grass texture and place the layer above the top form. Create a Clipping Masks, clipping it into the top form. 

Decrease the saturation by going to Picture > Changes > Hue/Saturation, setting it to -30 Saturation. 

Use Picture > Changes > Curves to darken the grass texture utilizing the settings beneath. 

Step 2

We wish to use multiple texture for our Minecraft grass texture impact, so Clip a second longer grass texture into the top form, inserting it over the primary. 

Go to Picture > Changes > Hue/Saturation and set it to Hue -50 and Saturation +15. 

Subsequent, use Picture > Changes > Curves to darken the grass. The settings are beneath. 

Step 3

Set the lengthy grass layer to Lighten and add a Layer Masks. 

Masks out any of the longer grass that you do not wish to be seen utilizing a default comfortable spherical Brush set to black. 

Step 4

Repeat the above steps on the physique of the creeper. 

Step 5

Repeat the identical steps by clipping the shorter grass into the “Mouth” group.  

Step 6

Clip a Brightness/Distinction adjustment layer into the “Mouth” group above the grass texture. Set the settings to Brightness -75 and Distinction -7.  

Step 7

Add a Layer Masks to the physique form, and use the present Layer Masks on the top to tough up the perimeters of each shapes utilizing any form of grungy, tough, or textured Brush set to black. 

You may additional regulate the colour of the top by clicking a Strong Shade fill layer into the top, setting it to Mushy Mild and 30% Opacity. Set the colour to your most well-liked shade of inexperienced—I used #87dc7e.

3. Learn how to add 3D lighting

Step 1

Now, we will begin portray on the shadows and lightweight. We’ll do that by layering and mixing layers set to Overlay,  Mushy Mild, and Multiply. 

We’ll be utilizing a comfortable spherical Brush in numerous sizes to color the sunshine and shadow. We’ll be utilizing three foremost colours that I’ll check with as:

• Lime inexperienced #bcd936
• Medium Inexperienced #36400a
• Darkish Inexperienced #141800

Create and Clip a New Layer into the physique, setting it to Overlay. Use the lime inexperienced and medium inexperienced colours to darken the perimeters of the physique and brighten the center. 

Step 2

Subsequent, create and Clip a New Layer into the physique, above the earlier layer. Set this layer to Multiply. 

Use a comfortable spherical Brush to color the darker inexperienced shade onto the physique. Focus the shadow below the top, and maintain it lighter on the perimeters.

Step 3

Double-click the Multiply layer to open the Layer Fashion panel. Look in direction of the underside at Underlying Layer. 

Transfer the white toggles to the left to mix the darker inexperienced away from the lighter values of the layer beneath the energetic layer. This may make the shadow appear much less flat. 

Step 4

Create and Clip one other Multiply layer over the earlier ones, and add a slight wash of darkish inexperienced to deepen the shadows. 

Step 5

Clip another layer into the physique, setting it to Mushy Mild. Use white to color a comfortable rim gentle on each side of the physique. 

Step 6

Now, we are able to transfer on to the top. Create and clip a New Layer into the top form, setting it to Overlay. 

Use lime inexperienced and medium inexperienced so as to add highlights and shadows to the facial options. 

Step 7

Create and Clip a New Layer above the earlier ones and set it to Multiply. Paint darkish inexperienced on the highest and the proper facet of the face. 

Alter the layer’s Mix If settings much like what you see beneath. 

Step 8

Create and Clip a second New Layer above the earlier ones, and once more set it to Multiply. Slowly deepen the shadows utilizing the darkish inexperienced shade. 

Step 9

Create and Clip two extra New Layers above the earlier ones, setting one to Overlay and the opposite to Mushy Mild.

Use these layers to color gentle onto the left and center of the face with each white and the lime inexperienced shade. Construct the sunshine and shadows up easily, utilizing extra layers and adjusting the Opacity as you want. 

Step 10

Repeat the above steps on the mouth as nicely. 

Step 11

Subsequent, create a New Layer set to Multiply above all different layers. Don’t clip this layer into any present form. 

Paint shadows utilizing the darkish inexperienced shade over the face and physique. 

Step 12

Lastly, create a New Layer set to Overlay and a second New Layer set to Mushy Mild below the latest Multiply layer. 

Use this layer to reinforce the present lighting and shadows on the top and physique, utilizing white, lime inexperienced, and medium inexperienced. 

Creating layers like these will assist unify and join the physique and head, giving a extra cohesive look. Nevertheless, if you do not have a black background, you may must both use masks or teams to maintain the lighting and shadows contained to the creeper’s form.   

4. Learn how to paint grass in Photoshop 

Step 1

Create a New Layer behind your creeper’s head and physique.  Choose the default “Dune Grass” brush and begin with a recent inexperienced #96b746 shade. Paint grass of various sizes and shades of inexperienced on the perimeters of your creeper.  

Proper-click in your Brush Suggestions, within the prime proper nook click on the Gear icon and choose Legacy Brushes. Within the “Legacy Brushes” folder, you may discover the “Dune Grass” brush.  

Step 2

Clip a New Layer inside the big darkish mouth form. Paint a grass texture contained in the mouth. 

Create and Clip a second layer contained in the mouth form, setting it to Mushy Mild. Paint shadows to present the face depth. 

Step 3

Duplicate the lengthy grass texture from inside the top form and produce it above the top, however beneath the highest lighting layers.  

Step 4

Barely darken the grass utilizing a Curves adjustment. 

For those who use Good Objects, you’ll be able to regulate the present Curves adjustment on the layer. 

Step 5 

Proceed to darken the grass texture utilizing Picture > Changes > Ranges. We wish the grass to appear to be single blades of grass.

Step 6   

Masks the grass in order that it seems to be as if it is coming from the highest of the top. 

Step 7

Repeat the above steps so as to add grass texture across the eyes and chin as nicely. 

5. Learn how to add a pixel sample in Photoshop

Step 1

Lastly, let’s end up by including an non-obligatory pixel sample to the creeper. You should utilize any pixel sample, together with a number of the free creeper-inspired patterns you could find on-line, one you made your self, or a Photoshop texture like this. 

Import and Clip the pixel sample into the creeper’s head, above the lengthy grass and below the inexperienced Strong Shade layer. Enlarge and place the pixel texture in order that it roughly traces up with the creeper’s eyes and mouth squares. 

Set the pixel sample to Mushy gentle. This layer will principally present the lighter coloured squares within the pixel sample. 

If the pixel impact is not robust sufficient, Duplicate the feel to make it extra intense. 

Step 2

Duplicate the pixel layer and set it to Multiply. This may assist deliver out a number of the darker squares within the pixel sample. 

Use Mix If on the pixel layer to deliver again texture to the darker areas if wanted. 

Step 3

Repeat the identical steps to use the pixel sample to the physique. 

Step 4

If including the pixel sample darkens your creeper an excessive amount of, add a Brightness/Distinction adjustment layer to the very prime of your layer stack, setting it to Brightness 40 and Distinction -30. 

That is how you can create a grass textured creeper from Minecraft!

This Minecraft grass texture impact is just not solely excellent in the event you’re a fan of the sport, but additionally for mastering the fundamentals of portray gentle and shadow and studying how you can use textures in Photoshop to deliver 2D characters to life. Do not forget which you could experiment with the lighting, colours, and shapes!

On the lookout for extra? Try a few of these different Photoshop tutorials: